Machine builders
DMG MORIDMG MORI machines run CELOS on top of FANUC, Siemens or HEIDENHAIN controls (and MAPPS on Mori Seiki heritage machines). DMG MORI's IoTconnector, standard on new machines since 202…DN Solutions (Doosan)Most Doosan / DN Solutions machines carry FANUC controls, commonly from the 0i and 30i series, so FOCAS is the usual path (part counts, cycle time, alarms). Machines with SINUMERIK…MakinoMakino's Professional 6 control is FANUC-based and most likely equipped with FOCAS. The embedded Ethernet port (CD38A) sits on the FANUC CNC unit; the FANUC screens are reached thr…Citizen (Cincom, Miyano)Citizen machines use Mitsubishi (most common) or FANUC controls. Mitsubishi M7 and M8 machines are read through MTConnect adapters; integrators publish minimum NC-MAIN versions for…Star MicronicsStar Swiss-type machines are most commonly fitted with FANUC 0i-series controls, so FOCAS is the standard connection.…TsugamiMost Tsugami machines run FANUC 31i-B and 0i-TF series controls, read over FOCAS for cycle times, part counts, alarms and status.…Nakamura-TomeNakamura-Tome machines use FANUC controls reachable over FOCAS2 / FOCAS. We found no Nakamura-Tome page documenting native OPC UA or MTConnect.…MatsuuraIntegrators group Matsuura with FANUC-controlled machines read over FOCAS.…EMCOEMCO offers an "OPC UA umati Interface" for WinNC that implements the OPC 40501-1 Basic Server profile with the Monitoring, Tools and Errors & Alerts facets: tool, program, line, d…