By machine builder
Connecting Tsugami machines
Most Tsugami machines run FANUC 31i-B and 0i-TF series controls, read over FOCAS for cycle times, part counts, alarms and status.
Controls found on Tsugami machines
| Control | Native protocol | Licence on the CNC | Default port |
|---|---|---|---|
| FANUC Series 30i / 31i / 32i / 35i (A, B, B Plus) | FOCAS2 (Ethernet) | Standard on B Plus; FOCAS library on the PC | 8193 |
| FANUC Series 0i (0i-D, 0i-F, 0i-F Plus) | FOCAS2 (Ethernet) | FOCAS Ethernet function (standard on many); FOCAS library on the PC | 8193 |
Sources
Facts on this page come from these documents, opened on 27 October 2026.
Last verified 27 October 2026 against vendor documentation. OPC UA Connect is an educational resource published by TEEPTRAK; it is not affiliated with the OPC Foundation, the MTConnect Institute or any control maker.