By machine builder
Connecting Makino machines
Makino's Professional 6 control is FANUC-based and most likely equipped with FOCAS. The embedded Ethernet port (CD38A) sits on the FANUC CNC unit; the FANUC screens are reached through "CNC Screen Display". Some machines have a NAT router between the CNC and the plant network.
Controls found on Makino machines
| Control | Native protocol | Licence on the CNC | Default port |
|---|---|---|---|
| FANUC Series 30i / 31i / 32i / 35i (A, B, B Plus) | FOCAS2 (Ethernet) | Standard on B Plus; FOCAS library on the PC | 8193 |
| FANUC Series 0i (0i-D, 0i-F, 0i-F Plus) | FOCAS2 (Ethernet) | FOCAS Ethernet function (standard on many); FOCAS library on the PC | 8193 |
Sources
Facts on this page come from these documents, opened on 27 October 2026.
Last verified 27 October 2026 against vendor documentation. OPC UA Connect is an educational resource published by TEEPTRAK; it is not affiliated with the OPC Foundation, the MTConnect Institute or any control maker.