Connect DMG MORI CELOS and IoTconnector
DMG MORI ships the IoTconnector as standard on new machines from 2020, with retrofit for machines from about 2013 and IoTconnector flex for older and third-party machines. It provides OPC UA (including Heidenhain-controlled machines), MTConnect and MQTT. Underneath CELOS sit FANUC, Siemens or Heidenhain controls; on CELOS with Siemens, MTConnect must be purchased, while on CELOS with FANUC it is usually pre-installed. Integrators report the CELOS MTConnect agent on port 15404.
At a glance
| Protocols | OPC UA, MTConnect, MQTT |
|---|---|
| New machines | IoTconnector standard from 2020 |
| Retrofit | IoTconnector retrofit (≈2013+), flex (older/third-party) |
| CELOS MTConnect port | 15404 (integrator) |
| Underlying controls | FANUC 30i-B/31i-B/31i-B5/0i-TF/32i, Siemens 840D sl, Heidenhain iTNC 530/TNC 620/640, MAPPS |
Connection paths
Install 1 to 3 hours per machine; quote from DMG MORI.
Connector Management > Machine Data > MTConnect slider; agent ID DMG_MORI_<serial>.
Use the FANUC, Siemens or Heidenhain method directly.
Licences and options
| Item | Option / part number | Paid? | Note |
|---|---|---|---|
| IoTconnector / Digital Manufacturing Package | Quote | Paid | |
| CELOS IoT Connectivity (Siemens machines) | Purchase | Paid |
Ports
| Port | Protocol | Note |
|---|---|---|
15404 | HTTP | CELOS MTConnect agent (integrator), probe at http://<ip>:15404/<ID>/probe |
Software versions
- IoTconnector controls listed in 2020: MAPPS V/IVS, Siemens 840D sl Operate/SL1, Heidenhain iTNC 530 HSCI, iTNC 530², TNC 620, TNC 640, FANUC 30i-B, 31i-B, 31i-B5, 0i-TF, 32i
Data you can read
- Machine status, production status, run times, downtimes, alarms, process data, additional signals
- Messenger V4: dashboards, e-mail events, REST API
Setting it up
- Identify CELOS and the controlCheck CELOS version and the underlying control.
- Enable MTConnectConnector Management > Machine Data > MTConnect.
- Use Ethernet X1Integrator guidance.
- Probe
http://<ip>:15404/DMG_MORI_<serial>/probe
Traps to avoid
- Some models cannot be equipped with the IoTconnector; check per model.
Connectors that support this control
| Product | Vendor | Type | Outputs |
|---|---|---|---|
| IoTconnector (retrofit, flex) + Messenger V4 | DMG MORI | Control or machine maker | OPC UA, MTConnect, MQTT |
| MachineMetrics Edge | MachineMetrics | Monitoring software | Cloud |
| Chatter (Toolpath) | Chatter | Monitoring software | — |
- Prices
Sources
Facts on this page come from these documents, opened on 27 October 2026.
- DMG MORI — Connectivity
- DMG MORI — IoTconnector release (23 Dec 2020)
- MachineMetrics support — DMG MORI CELOS (Siemens)
- MachineMetrics support — DMG MORI CELOS (FANUC)
- Chatter — DMG MORI integration
Last verified 27 October 2026 against vendor documentation. OPC UA Connect is an educational resource published by TEEPTRAK; it is not affiliated with the OPC Foundation, the MTConnect Institute or any control maker.