Controller · NUM
Connect NUM Flexium+ / Flexium / Axium / Power 1000
NUM's NUMConnect is an MTConnect 1.3.0-compliant option (announced August 2015) for Axium, Flexium, Flexium+ and Power 1000, running adapter and agent on a Windows PC or NUM panel PC, and able to read anything on the HMI including drive and encoder errors. We found no NUM documentation of OPC UA on Flexium+.
At a glance
| Native protocol | MTConnect via NUMConnect option |
|---|
| Host | Windows PC or NUM panel PC |
|---|
| OPC UA | Not documented |
|---|
Connection paths
Licences and options
| Item | Option / part number | Paid? | Note |
|---|
| NUMConnect | Option | Paid | |
Ports
| Port | Protocol | Note |
|---|
5000 | HTTP | Typical MTConnect agent port |
Software versions
Data you can read
- Anything on the HMI including drive and encoder errors (NUM)
Setting it up
- Order NUMConnectThrough NUM or the machine builder.
- Install on the panel PCAdapter and agent.
- Test the agent/probe and /current.
| Product | Vendor | Type | Outputs |
|---|
| MTConnect cppagent | MTConnect Institute (Apache-2.0) | Open source | MTConnect REST, MQTT |
CNC connector directory →
Not published by the vendor. We could not find these in vendor documentation. Ask the control or machine maker before you rely on them.
Sources
Facts on this page come from these documents, opened on 27 October 2026.
- Modern Machine Shop — NUMConnect MTConnect option
Last verified 27 October 2026 against vendor documentation. OPC UA Connect is an educational resource published by TEEPTRAK; it is not affiliated with the OPC Foundation, the MTConnect Institute or any control maker.