Controller · Fagor Automation
Connect Fagor 8065 / 8060 / 8070 / 8055
Fagor's Digital Suite connects machines over OPC UA, umati, MTConnect and MQTT, and Fagor announced an MTConnect adapter for its CNCs in 2015. We found no Fagor page documenting a native OPC UA server on the 8065/8060/8070 itself. Advantech WebAccess/CNC lists Fagor 806X/807X.
At a glance
| Vendor suite | Fagor Digital Suite (OPC UA, umati, MTConnect, MQTT) |
|---|---|
| MTConnect | Fagor adapter (announced 2015) |
| Native OPC UA server | Not documented |
| Third party | Advantech WebAccess/CNC: Fagor 806X/807X |
Connection paths
Fagor Digital SuiteVendor product
MTConnect adapterAlternative
Advantech WebAccess/CNCAlternative
Data you can read
- Depends on the path; Fagor Digital Suite modules cover OEE, availability and energy
Setting it up
- Ask FagorConfirm the adapter or suite licence for your CNC model and software.
- Pilot one machineList the data items actually returned before rolling out.
Traps to avoid
- Model coverage of the Fagor adapter is not published.
Connectors that support this control
| Product | Vendor | Type | Outputs |
|---|---|---|---|
| WebAccess/CNC | Advantech | Monitoring software | OPC UA/DA, Modbus, REST |
| DataXchange | Scytec (Minitab) | Monitoring software | — |
Not published by the vendor. We could not find these in vendor documentation. Ask the control or machine maker before you rely on them.
- Native OPC UA server on 8065/8060/8070
- Models covered by the MTConnect adapter
Sources
Facts on this page come from these documents, opened on 27 October 2026.
Last verified 27 October 2026 against vendor documentation. OPC UA Connect is an educational resource published by TEEPTRAK; it is not affiliated with the OPC Foundation, the MTConnect Institute or any control maker.